|
A very high quality audio-amp in a 5-pin TO-220 package that does not require insulating washers between the tab and the heatsink in single rail supply applications. The amp will deliver 20W into 4 or 8 loads with a 50V supply. The device uses advance circuit techniques to achieve extremely low distortion levels even at high output levels (only 0· 015% at 1kHz and 0· 05% at 20kHz into 8 and 0· 07% at 20kHz into 4 all with 20W output). Care must be taken with the PCB layout and the data sheet shows suitable layouts for the circuits shown. |
Note that if using a dual supply the IC's tab must be insulated from the heatsink and since this increases the thermal resistance a larger heatsink will be required. |
Parts List Dual Supply Amp |
R5 |
Min Res 1![](../../../images/ohm.gif) |
(M1R) |
C1,2 |
Minelect 4· 7╡F 35V |
(YY33L) |
C5,6 |
PC Elect 47╡F 63V |
(FF09K) |
C7,8 |
PC Elect 1000╡F 35V |
(FF18U) |
C9 |
Monores Cap 0· 22╡F |
(RA50E) |
20W Amplifier Single Supply |
Parts List for Single Supply Amp |
R1,2,3 |
Min Res 22k |
(M22K) |
R7 |
Min Res 1![](../../../images/ohm.gif) |
(M1R) |
C1 |
Minelect 1╡F 63V |
(YY31J) |
C2,3 |
PC Elect 47╡F 63V |
(FF09K) |
C4 |
Monores Cap 0· 1╡F |
(RA49D) |
C5 |
Monores Cap 0· 22╡F |
(RA50E) |
C6 |
Can 2200╡F 63V |
(FF22Y) |
C7 |
Axial 1000╡F 63V |
(FB84F) |
|